Glass is the building
Showroom walls are glass from floor to ceiling, and every mark on them lands between a customer and the vehicle they came to look at.
>
Skip to main contentServing Lincoln, Nebraska & surrounding areas
Mon–Fri 8am–6pm · Sat 9am–2pm
Showroom to shop in Lincoln, Nebraska
Showroom, service drive, lounge and shop areas cleaned as one property, with glass and floors treated as part of how the inventory looks.
Showroom to shop
A dealership puts a glass showroom, a customer lounge and a working shop under one roof. The soil in each of them is unrelated to the soil in the rest.
Showroom walls are glass from floor to ceiling, and every mark on them lands between a customer and the vehicle they came to look at.
Showroom tile and polished concrete sit under bright lighting that finds every streak, scuff and tire mark the moment it appears.
Seating, tables, coffee stations, children's corners and restrooms are used by people with nothing to do but look around.
Bay floors carry oil, coolant, brake dust and tire marks, which need degreasers and machines rather than the mop that serves the showroom.
Across the property
Scopes here get written area by area, because a single task list for a whole dealership would either over-serve the shop or under-serve the showroom.
Interior and exterior panes, entry doors, partitions and glass office fronts are cleaned so there is nothing between a customer and the vehicles.
Tile, polished concrete and display pads are cleaned and maintained with methods that respect the finish and keep tire marks from setting.
Floors, counters, podium surfaces, door glass and the walkway customers use on arrival are cleaned on every visit.
Seating, tables, coffee and vending surfaces, television ledges, children's areas and the floor beneath all of it are cleaned and reset.
Desks, chairs, closing room tables, floors and glass in the offices where paperwork gets signed are cleaned around documents.
Bay floors, walkways, parts counters, break areas and restrooms in the service side are degreased and cleaned on the agreed interval.
Stores and service
Franchise stores, independent lots and standalone service operations all carry some mix of display space, customer space and shop space in different proportions.
Showrooms, service drives, lounges, offices and shop bays under one roof, where a manufacturer's image standards apply to the customer-facing areas.
Smaller waiting areas with a larger proportion of bay floor, where the shop side carries most of the cleaning hours.
Around service hours
Dealerships open early and close late, often six days a week, so a visit gets fitted into the gap between a shop closing and a service drive opening.
The showroom, drive, lounge, offices and bays all get looked at, along with floor types, glass area and where shop soil ends up.
Each area gets its own tasks, products and frequency, with the showroom and lounge usually running more often than the bays.
Entry, alarm, key handling and the latest finish time before the service drive opens are agreed in writing.
Crews work the customer side first and the shop side after, so degreasing equipment never crosses a clean showroom floor.
Glass frequency and bay floor intervals usually need adjusting once we have seen a full month of weather and service volume.
Dealership projects
The surfaces a dealership is judged on, glass and floors, both need project work on their own cycle, and the shop side needs heavier treatment than a route provides.
Showroom and lounge floors run on floor care: refinishing, burnishing, polished concrete maintenance and carpet extraction in the offices. A showroom floor under display lighting benefits from a shorter burnishing cycle than most buildings need.
Exterior glass on a showroom elevation is a window cleaning project rather than part of a nightly route, usually on a short interval because road spray shows immediately. Bay floors, overhead dust and heavy degreasing are industrial cleaning work, with equipment a standard route does not carry.
The nightly arrangement itself is described on the janitorial services page, and a dealership coming off poor service usually starts with deep cleaning. A new build, a facility upgrade or an image program leaves dust for post-construction cleaning, and a first-aid or occupational health room on site is better covered by the medical office cleaning plan than by this scope.
Dealership pricing
Dealerships are quoted as recurring work, typically monthly, with per-visit rates behind it because the customer side and the shop side often run on different frequencies.
Monthly recurring cleaning in Lincoln is published at about $300 to $1,500+, and a dealership tends toward the upper part of that because of its glass and floor area. Smaller operations on a weekly visit often land at $150 to $400 per visit, and properties with multiple restrooms, a breakroom and high traffic are quoted at $500 to $1,200+ per visit.
Glass area, showroom floor type and bay count are the three inputs that matter most. Service volume, lounge traffic, whether the showroom floor is polished concrete or tile, and how often each zone needs attention all move the figure.
Heavy shop degreasing, bay floor machine work and showroom floor refinishing are quoted separately after the walkthrough, since they need different equipment and hours. The recurring number comes in writing once the zones and frequencies are settled.
Under the lights
Buyers notice the same things in every showroom: the clarity of the glass, the floor between the vehicles, and whether the lounge looks looked after.
Vehicle cleaning and detailing stay with your own staff or your detail vendor, since that work has its own products and process. Our scope is the building: glass, floors, lounge, offices, restrooms and shop areas. Display pads and the floor immediately around a vehicle are cleaned as part of the showroom work.
Dealer questions
General managers and fixed-operations directors tend to ask about glass frequency, shop floors and how a crew works around a long operating day.
More often than most buildings, because showroom glass is the display case for the inventory and sits under strong lighting. Interior glass usually gets attention on every visit, while the full exterior wash runs on its own shorter interval. Weather and road spray on a street-facing elevation are what set that interval.
They can be in the same agreement, though usually not at the same frequency. Walkways, the parts counter and shop restrooms suit a regular visit, while bay floor degreasing and machine work are periodic because they need the bays clear. The two schedules are written side by side so coverage is obvious.
Snow melt, salt and slush come straight in on tires and shoes, and the drive and its entry floor need more attention through those months. Matting gets lifted and cleaned underneath rather than vacuumed on top. Frequency in that area is generally raised for the season and dropped again after it.
After the shop closes and before the service drive opens is the usual window, which on a six-day operation can be narrow. Showroom and lounge work goes first, then offices, then the shop side. The finish time is agreed up front and held to, because an open service drive leaves no room for equipment.
Day porter coverage suits that area well, since a lounge used all day cannot stay presentable on an overnight visit alone. Coffee stations, tables, restrooms and seating get checked and reset at intervals you choose. That is priced as added hours on top of the recurring scope.
Book a property walk
Tell us the showroom size, the bay count and your operating hours. Walking the property gives us a separate scope for the customer side and the shop side, with the quote in writing.
Request a quote
Send the building type, approximate size and the areas you want covered. A walkthrough is scheduled next, then a written scope and quote.